Description

Battery Included: no

Brand Name: YINSITOM

Choice: yes

High-concerned chemical: None

Model Number: GZSF289

Paper Size: A4

Type: Pouch Laminator

Desktop Laminator Machine Set A4 Size Hot and Cold Lamination 2 Roller

System 9 inches Max Width for A4/A5/A6

Features:

• HOT & COLD Modes – 2 laminating ways, thermal and cold laminating mode. They are perfect for different types of laminating pouches. Suitable for photos and documents.
• Excellent Capacity – GZSF289 is a personal laminator designed for hot and cold lamination. The minimum laminating thickness is 160 (2×80) microns and the maximum thickness is 250 (2×125) microns.
• Portable & Practical Machine – 35.5 x 10.7 x 6.6cm machine size, with 230mm/9 inches entry width, fit for A4/A5/A6 size paper which meets all your needs.
• Faster Heatup – With impressive 2-4min heat-up time, remarkable 280mm/min laminating speed deliver an effective & efficient production.
• No More Paper Jam – ABS release button. When the jam is happening, just push the ABS button and pull out the paper. With an innovative operating system, which can bring you a quiet environment during work without noise.

Specification:

• Color: White
• Size: 35.5 x 10.7 x 6.6cm/12.8 x 4.2 x 2.6in
• Weight: 918g/32.4oz
• Input Voltage: 220-240V/50Hz
• Entry Width: 230mm
• Min pouch thickness: 160(2×80) micron
• Max pouch thickness: 250 (2×125) micron
• Min pouch size: Credit card size (54x86mm)
• Max pouch size: A4 size
• Entry Thickness: 0.5mm
• Preheat Time: 2-4min
• Working power: 260W
• Laminating Speed: 28cm / min
• Package Size: 38 x 14.3 x 7.8cm/15 x 5.6 x 3in
• Package Weight: 1020g/36oz

Package List:

1 x Laminator Machine

Q1:Foggy white spots on non-stick paper/photos
**Possible Cause 1: Insufficient Temperature Setting

##Solution: Set the temperature to the corresponding thickness required by the temperature of the more

**Possible Cause 2: Temperature setting is enough, but the preheating time is not reached, the temperature does not reach the set point before use.
##Solution: Please wait patiently for the laminator to reach the set temperature before operation.

Q2:Laminating wrinkles and unevenness
**Possible reason 1: the temperature is too high
##Solution 1:Reduce the temperature appropriately.
**Possible cause 2:The rubber roller of the gluing machine is not flat.
##Solution 2:Check if the roller is flat and intact.
**Possible Cause 3:The gluing material is not flat when it is placed.
##Solution 3:Place the rubberized material flat, and then put it into the sealing machine flat.

Q3:The four sides are not sticky/blistering on the empty side.
**Possible cause 1: insufficient pressure on the rubber roller of the gluing machine.
##Solution 1:Tighten the pressure of the rubber roller of the gluing machine.
**Possible cause 2: temperature is not enough
##Solution 2:Increase the temperature.
**Possible cause 3: impurities in the rubber coater roller
##Solution 3:Clean the impurities on the rollers.